Instruction manual

3-6
CHAPTER 3. CONVENIENT FUNCTIONS
CALL FORWARDING-RELATED FUNCTIONS
3. CALL FORWARDING
3.1. Function
When away from one's desk, incoming calls can be automatically forwarded to another receiving station. The
receiving station* number can be registered at the original station (forwarding station). It is also possible to
active this feature from the destination receiving station. (See the figure in section 3.3. on the next page.)
* Both the forwarding and receiving stations must be either master stations or telephones. Calls cannot be
forwarded to a substation.
[System pre-programming]
To use this function, enable the Call Forwarding function in system programming.
3.2. Registration Operation
3.2.1. Registration and cancellation at the original station
(1) Registration at the original station
First dial [ ][6][0], and then the receiving station number (example: [9][3]) followed by [#].
A confirmation tone sounds to indicate registration completion, and the registered receiving station
number* is displayed, returning the station to standby mode.
* The station's name may be displayed.
(2) Registration cancellation at the original station
First dial [ ][6][0], and then the original station number (example: [9][2]) followed by [#].
Cancellation completion is indicated by a confirmation tone. The station then returns to standby mode and
the current time is shown on the display panel.
3.2.2. Registration and cancellation at the destination receiving station
(1) Registration at the receiving station
First dial [ ][6][1], and then the original station number (example: [9][2]) followed by [#].
• Registration completion is indicated by a confirmation tone, and the receiving station returns to standby
mode.
• The receiving station number* is displayed on the original station.
F W D
:
93
Displays Call Forwarding mode.
Display panel
F W D
:
O f f ice1
11
:
59a m
F W D
:
93
Displays Call Forwarding mode.
Original station's display panel