Instruction manual

5-4
CHAPTER 5. PC-CONTROLLED FUNCTIONS
(5) Public address system setting
Registers the control outputs assigned to the zone designating the exchange number (1 – 16).
Contents
Setting Item
Zone
Resisters external public address equipment outputs (1 – 16) for each
zone.
Note
Only 1 voice output is made available for paging to external equipment.
It is impossible for 2 or more persons to simultaneously initiate paging.
(6) External source distribution setting
Registers zones to the control input designating the exchange number (1 – 16).
Contents
Setting Item
Zone
Resisters up to 9 (19) paging zones for each activation input (1 – 4).
(7) Emergency conference setting
Registers the following contents designating the master station.
Contents
Setting Item
Member Station Exchange Number
Sets the exchange number to which the master station (telephone) is
connected (1 – 16).
Member Station Line Number
Sets the line number of the master station (telephone) (1 – 4).
Member Station Number
Sets the station number of the master station (telephone).
Member Station Name
Sets the name of the master station (telephone).
(8) Direct select setting (Relay output from the AI-910DI card)
Registers the following contents designating the exchange number (1 – 16).
Contents
Setting Item
Control Output Mode
Selects the external equipment control output operation mode ("make
contact" when conversation begins or when calls are initiated).