Operation Manual

- 11 -
PREPARATION
Connecting the station with Wi-Fi
There are two connecting methods available.
• Auto Connect (WPS)
• Manual Setup
• Wi-Fi (Search SSID)
• Wi-Fi (Manual Setup)
• IP Address
Connecting using "Auto Connect (WPS)"
This method connects to a Wi-Fi network using the "Wi-Fi
Protected Setup
TM
" function of a router/STB. Select this
method when it is not required detailed settings.
1 From the MENU screen, tap
ĺ
>
ĺ
Other Settings
.
A con¿ rmation screen will be shown.
2 To continue con¿ guring the settings, tap
9
.
3 Tap
Network
ĺ
9
ĺ
Auto Connect (WPS)
.
4 Press the WPS button on the Wi-Fi router, and
then
tap
9
.
Connection between the residential/tenant station and
Wi-Fi router is established automatically. (In some cases, it
may be necessary to tap
9
before pressing the WPS
button on the wireless router.)
When "The Wi-Fi router has been connected." is shown,
the connection is successful.
After the setting has been completed, the display switches
to the VIDEO QUALITY screen. Refer to step 4 of
"Adjusting video quality". (
ĺ
P. 40)
If the connection is failed
"Connection failed" will be shown.
Con¿ rm the current network settings and change the settings
properly. (
ĺ
P. 14)
If the connection cannot be established properly, use the
"Manual Setup" method.
* If you connect the station to the Wi-Fi router by using the
"Auto Connect (WPS)" method after the IP address was set
by using "Manual Setup" method, initialization of the user
setting is necessary. (
ĺ
P. 4 2 )
Connecting using "Manual Setup"
Select this method to con¿ gure the detailed settings.
1 Con¿ guring wireless LAN
Con¿ gure the settings for the following items manually.
Item Description
SSID
Tapping the entry field displays the keyboard.
(ĺ P. 1 6 )
Use the keyboard to enter the SSID of the wireless
LAN router.
Encryption
Tapping the entry field displays the choices. Select
the appropriate encryption method, and tap
9
.
Settings: None / WEP / WPA-PSK(TKIP/AES) /
WPA2-PSK(AES)
Default: WPA2-PSK(AES)
Password
Tapping the entry field displays the keyboard.
(ĺ P. 16)
Use the keyboard to enter the password.
* Hexadecimal key format is not supported.
* When using the keyboard, be sure to tap
9
after ¿ lling
out the entry ¿ eld to determine the contents.
* Use the characters only on the keyboard for SSID and
Password.
1
2
3
1
2
3