Operation Manual

- 28 -
USING THIS STATION
1 From the MENU screen, tap
.
2 Tap the entrance station to monitor.
Video and audio from the entrance station will be
received at the residential/tenant station.
* Audio from the residential/tenant station is muted.
3 To end monitoring, tap
.
* The monitoring will end automatically after the elapse of
about 30 seconds from the start of monitoring.
Available functions during monitoring
•
: Talk (
ĺ
P. 21)
•
: Manual recording (
ĺ
P. 24)
•
: Setting change (
ĺ
P. 25)
•
: Zoom In/Zoom Out (
ĺ
P. 23)
•
: Activating the external unit such as lightning
equipment (
ĺ
P. 2 2 )
NOTE:
• Entrance station cannot be monitored by using the AIPHONE
Type GT.
• You may not be able to perform monitoring depending on the
setting of the entrance station. Also, you cannot monitor an
entrance station without a camera.
1 Tap
.
The guard station will receive a call and the following
screen will be shown.
2 Speak when the guard answers.
* If there is no answer, touch
to call the guard
station again.
* If there is no answer, a call record will be stored in the
guard station, and noti¿ cation of the call will be sent to
the guard station.
* Screen brightness and receiving volume can be
adjusted during a call. (ĺ P. 2 5 )
Monitoring the
entrance station
Calling the guard
station