User's Manual

- 8 -

SETTING UP

6-1

Setup tool

* Completing settings with the setup tool is required.

1. Install the setup tool in the PC (Windows 7/VISTA/XP ®) beforehand,

and then enter the resident information.

* For details on the setup tool, refer to the GT Series Installation & Op-

eration Manual.

Save programmed data and resident information data to your PC is rec-

ommended.

2. Connect the PC terminal of GT-BCX to the PC with USB cable (A-B

type) (included with GT-NS(-V), GT-MK, GT-DM(V)).

* PC requires USB output.

3. Start the setup tool (double-click gt_program.exe).

4. Select the system (GT or GH).

5. After inputting resident information and clicking OK, the “Lift Control

1” tab and “Lift Control 2” tab will appear if “Lift Control” is selected

in the “View” menu.

If resident information is not input, the “Lift Control 1” tab and “Lift

Control 2” tab will not appear.

GT-BCX

USB Cable (A-B type)