User's Manual

- 9 -

6-2 6-3

Lift Control 1

[1] GTW-LC ID

[2] Select “ON” or “OFF” for the GTW-LC connection.

[3] Select “N.O.” or “N.C.” for the Output Type.

[4] Set the Timer. The time setting range is “1 to 600” sec. (one second

increments)

• Clicking the upper spin button will increase the time setting, and clicking the

lower spin button will decrease the time setting. At this time, a numerical value

exceeding either the upper or lower value limits cannot be set.

• The number of seconds can be input directly by clicking inside of the Timer

box.

• Input can be set by pressing the Enter key or by clicking inside of another Timer

box.

[5] After GT system settings are completed, the connected GTW-LC ID

numbers will display in black if the “Check” button is clicked while

connected to GT-BCX.

The system will be in use when Connecting status is being checked.

Checking connections is not possible while the system is in use.

Lift Control 2

[1] The resident information that has been entered will be displayed.

[2] Set which relay will activate in the corresponding GTW-LC for each

residence. The setting range is “1 to 20”.

[1]

[2]

[3] [4]

[5]

[1] [2]

6-4

Data transfer

1. Select “Export” in the “Connection” menu.

2. If “Yes” is selected, the data will be transferred to GT-BCX.