User guide

ManualsBrandsAiphone ManualsVideo surveillance systemsIP-EWST

- INSTRUCTIONS -

The IP-EWST offers voice-quality Intercom function over TCP/IP based networks. Designed specifically to

integrate seamlessly into a new or existing LAN / WAN infrastructure, the IP-EWST is capable of hundreds of

stations, fulfilling a large variety of applications including commercial, industrial and residential access

control; general security, office, and institutional intercom / paging; and many more. Power over Ethernet

(PoE) capability is also supported (IP-EWST-POE only), allowing greater installation flexibility for both new

and retrofit applications.

Intercom-Over-IP Adaptor Set

Pg. 1

NAMES & FEATURES

FEATURES:

Cost-effective PC-based design

Compatible with LE-series and IE-series

substations, as well as standard speaker /

pushbutton stations

Scalable to hundreds of stations / locations

Works with standard wired and wireless TCP/

IP networks (LAN/WAN)

Digital audio recording and playback capability

Relay output for remote release (N/O and N/C)

NAMES & FUNCTIONS:

1. RJ-45 10/100 Ethernet jack &

connection indicator LEDs

2. 2.1mm Power jack

3. 3.5mm Audio output jack

4. 3.5mm Mic input jack

5. Sub station personality jumper

6. Sub station / relay terminals

7. Manual sub station push buttons &

Diagnostic LEDs (LD1,LD8,LD9,LD10)

9. Wire access hole

IP-EWST

IP-EWST-POE

1106

2W ST

Package Contents:

(1) IP-EWST or IP-EWST-POE

(1) Talkmaster™LE mini-CD

(4) Chassis screws

(2) Adhesive-backed pull tie guides

RESET + - TALK

LD10

LD9

LD8

LD1

Summary of content (4 pages)

PAGE 1
106 Intercom-Over-IP Adaptor Set - INSTRUCTIONS The IP-EWST offers voice-quality Intercom function over TCP/IP based networks. Designed specifically to integrate seamlessly into a new or existing LAN / WAN infrastructure, the IP-EWST is capable of hundreds of stations, fulfilling a large variety of applications including commercial, industrial and residential access control; general security, office, and institutional intercom / paging; and many more.
PAGE 2
INSTALLATION & MOUNTING Installation Instructions: 1. If IP-EWST adaptor is not on the same LAN or network segment as the PC master station, ensure that the IP-EWST has been pre-programmed with the proper TCP/IP connection settings prior to physical adaptor installation. See TalkMaster™ installation manual (included on CD with IP-EWST). Personality Switch Settings 2W ST 2W ST IE/IF-Series Sub stations 2W ST LE-Series Sub stations 2. Set the personality jumper based upon your chosen sub station.
PAGE 3
SOFTWARE INSTALLATION 1. Insert the mini-CD (included with the IP-EWST / IP-EWST-POE set) into the PC to be used as a master station. 2. Install the TalkMaster™ software by following the on-screen prompts, or by navigating to your CD drive and executing “setup.exe” to begin the installation process. 3. Consult the TalkMaster™ User Guide document for further software functionality and configuration information.
PAGE 4
SPECIFICATIONS Hardware Specifications: Input Voltage: Network Interface: IP Assignment: Hardware Protocols: Transport Bandwidth: LED Indicators: Audio Resolution: Audio Sample Rate: Audio Buffers: Audio Latency: Output Amplification: Relay Contact Rating: Operating temperature: Dimensions: IP-EWST – 7.5-9VDC, 500mA, use included power supply IP-EWST-POE – IEEE 802.