User Guide

ManualsBrandsAIPHONE ManualsDoor StationAIPHONE IX-DVF-4A IP Video Door Station

IX-DVF-4A

The IX-DVF-4A is an IX Series video door station with 4 call buttons for selective calling to IX-MV7 master

stations. The IX-DVF-4A will connect to a network switch, and the call buttons are connected to contact

inputs on the station. These inputs will be programmed to selectively call di󰀨erent master stations, or

groups of master stations.

INSTALLATION AND PROGRAMMING GUIDE

IX-DVF-4A

• IP video door station

• 4 Labeled Call Buttons

• Stainless steel faceplate with tamper resistant screws

Features

1. Camera

2. Microphone

3. White LED for night viewing

4. Speaker

5. Call buttons

Names and Functions

PACKAGE CONTENTS

IX-DVF-4A

Door Station

Flush mount backbox and

mounting bracket

2 Security Screws

4 Bracket Screws

Security Driver

Label Template

Page

For ush mounting, recess the supplied back box

into the wall, then attach the mounting bracket

using the four provided bracket screws.

Back Box Dimensions: 12-1/2" H x 6-1/8" W x 2-3/8" D

IX-DVF-4A Dimensions: 13-11/16" H x 7-3/16" W

For surface mounting, use the SBX-IXGDM7 surface

mount box. This box can mount to a standard

single gang box or to any at surface.

To install the labels, cut along the template guides, then

slide each side in to the label space on the panel.

Installation

Door Release

wire harness

Summary of content (7 pages)

PAGE 1
IX-DVF-4A INSTALLATION AND PROGRAMMING GUIDE The IX-DVF-4A is an IX Series video door station with 4 call buttons for selective calling to IX-MV7 master stations. The IX-DVF-4A will connect to a network switch, and the call buttons are connected to contact inputs on the station. These inputs will be programmed to selectively call different master stations, or groups of master stations. Names and Functions IX-DVF-4A 1 2 3 1. 2. 3. 4. 5.
PAGE 2
Wiring Diagram PoE Switch Cat-5e / Cat-6 Button Pattern 1 2 3 4 IX-MV7 IX-MV7 IX-MV7 IX-MV7 IX-DVF-4A The button pattern shown here corresponds to the Option Input numbers covered later in this manual. Specifications Camera unit: Min. illumination: Terminations: Operating Temp: Wiring Distance: Dimensions: w/ SBX-IXGDM7: 1/3" color CMOS 1.
PAGE 3
Getting Started This programming guide will cover how to program an IX-DVF-4A door station and IX-MV7 master stations using the IX Support Tool software. For additional information and documentation for the IX system, please visit www.aiphone.com/IX. Creating a New System Open the IX Support Tool, then select File from the top menu and click Create New System. Enter in a System Name, and select the No radial button for Wizard Programming. Enter a system ID and Password.
PAGE 4
Network Settings - IP Address The IP addresses for the stations can be individually set for each station or they can be configured in a batch. This guide will show how to assign via the batch configuration. Expand Network Settings and click on IP Address, then click Batch IP Address Configuration Batch IP Address Configuration On the Batch IP Address Configuration page, enter a starting IP address and subnet mask. Check the box beside each station or click Select to check all stations at once.
PAGE 5
Association Settings The station name and IP address that were assigned in the previous steps will now need to be associated to each station in the system before any call settings can be uploaded. From the top menu bar, select Tools(T) from the top menu, then click Association Settings. When the Association Settings window opens, it will automatically begin searching for any IX stations on the network.
PAGE 6
Call Button Settings - Option Inputs The IX-DVF-6 has six call buttons that are wired to Option Inputs. These inputs will need to be programmed to place a call. Click on Station View , then expand Option Input/Relay Output Settings and select Option Input. Option Inputs In the Select Station to Edit menu, use the Number drop-down to select the IX-DVF-6, then click Select . Use the Option Input drop-down to select Option Input 1. Click the Call radial button, then click Update .
PAGE 7
Programming Call Buttons To link the Called Stations groups to the call buttons on the door station, expand Call Settings and click on Call Origination. Use the Call Button / Option Input # drop-down and select Option Input 1. Use the Standard Mode Settings - Call Destination drop-down to assign a call group to the Option Input. Press Update when a call group has been set, then switch to the next Option Input and repeat until all of the Option Inputs that will be used have a call group linked to them.