Quick Start Guide

15
Step 2: Call List Partitioning
Partitioning a System
The above station types will default to calling Group 1. On the Called Station for Door/Sub Stations page, select
Group 1 from the Display Settings drop down. There will be a list of all Door and Master Stations, with a "U"
between each by default. A "U" represents call-in between these stations is enabled; a blank space means call-in
is disabled.
Select the blank eld from the drop-down to
remove the station from the Door Station's
call list.
2.2 - Call Settings
Station Type: IX-DV, IX-DVF(-*), IX-SSA(-*), IX-SS-2G, IX-RS-*
Click the Update button to store the settings.
2.3 - Update
"U" stands for unicast, the default
communication method for the IX
Series
Note:
Station Type: IX-DA, IX-DF (-*), IX-BA, IX-SS(-*)
Select Group 01 from the
Display Settings drop down.
2.1 - Display Settings
The above station types will default to calling Group 10. On the Called Station for Door/Sub Stations page, select
Group 10 from the Display Settings drop down. There will be a list of all Door and Master Stations, with a "U"
between each by default. A "U" represents call-in between these stations is enabled; a blank space means call-in
is disabled.
Select the blank eld from the drop-down to
remove the station from the Door Station's
call list.
2.5 - Call Settings
Click the Update button to store the settings
and continue to the next step.
2.6 - Update
Select Group 10 from the
Display Settings drop down.
2.4 - Display Settings