Quick Start Guide
Table Of Contents
16 | IX Quick Start Programming Guide
Partitioning a System
Step 3: Setting File Upload
The nal step in this process is uploading the setting le to each station. This program le contains the system
partitioning created in the previous steps, as well as any other setting conguration changes made.
Note that without uploading a setting le, most functions and features will be unavailable to the stations.
Using the Status column, conrm that
each station has received its setting le.
3.4 - Conrm Status
It is recommended that a copy of the settings be saved after uploading settings to the stations. Refer
to page 7 of this guide for the procedure to export and save settings.
Note:
Click
Select
to check all stations in
the system.
3.2 - Select Stations
Click
Settings
to begin the upload
process.
3.3 - Upload Settings
3.1 - Upload Settings To Station
From the menu bar, select File then Upload Settings To Station.