Quick Start Guide

22 | IX Quick Start Programming Guide
Adding a New Station
Step 3: Station Customization - Optional
Support Tool will provide each station a default Station Name, four-digit Number, and IP Address starting from
192.168.1.10. To edit this information, click
Station Details
in the Advanced Settings section, shown below.
To use the default information created by Support Tool, skip to Step 4.
Optional Settings
Individually partition, enable, or disable
door release access.
Door Release
Batch congure network information by
station type or for the entire system.
Batch IP Address Conguration
Select which stations are displayed in
each Master Station's address book.
Address Book
Edit Number, Name, IP Address by
clicking on
Station Details
.
3.1 - Station Details
Enter a name for each of the stations in
the system (24 characters max).
3.3 - Station Name
Changes made during this step
will not be applied until the
programming process has been
completed.
Note:
Enter a 3-5 digit station number for each of
the stations in the system.
3.2 - Station Number
Enter a static IP Address and Subnet mask
for each of the stations in the system.
3.4 - IPv4 Address
When done making changes, click
OK
.
3.5 - Update Station Details