Quick Start Guide

24 | IX Quick Start Programming Guide
Step 5: Setting File Upload
Once each station has been associated with its individual station information, the setting le containing the rest
of the system’s information will need to be uploaded to each device. To upload the setting le, the programming
PC will need to be in the same subnet as the associated stations (refer to Step 4). The PC’s current IP address
is listed in the bottom left-hand side of this window.
Note that without uploading a setting le, most functions and features will be unavailable to the stations.
Adding a New Station
Step 6: Export Settings
The nal step in this section is to create a copy of the system’s setting le and exporting it to a secure location or
external drive.
6.1 - Export
Click
Export
.
6.2 - Select Folder
Select location to save the le then click
OK
.
6.3 - Finish
Click Finish .
The progress of each station
will be displayed in the Status
column. Unavailable stations
may still be rebooting from
the association process. If a
station has rebooted and is
still unavailable, ensure the
programming PC is in the same
subnet as the station.
Note:
5.3 - Next
After successful upload, click
Next
.
If the original program le is lost, or Support Tool is moved to a different PC, this copy can be used to
access the system programming to add or remove a station, or to make programming changes.
Note:
5.1 - Select
Stations can be selected individually, or by Type.
Choose All from the Select Station by Type drop down
menu to upload to all stations. Then, click Select .
5.2 - Start Upload
Once station Status shows Available (may take a few minutes),
click Start Upload .
AIPHONE CO., LTD., NAGOYA, JAPAN
Issue Date: Oct.2018 FK2465
Ⓐ
1018 RQ 61107