Quick Start Guide

9
Step 3: Registering a Network Camera to a Master Station
Use the Select drop-down menu to select
each Master Station you wish to register the
network camera to.
3.1 - Select
For a Master Station to interact with a Network Camera, either during a camera call-up or while monitoring, it
must be registered to a Master Station's Network Camera List.
4
3
Network Camera Integration
Step 4: Assigning a Network Camera to a Station
Click
Update
to store the settings and
continue to the next step.
4.5 - Update
To allow a Network Camera to be used in conjunction with an IX Series station for camera call-up, the camera
must be registered to each station it will interact with.
From the menu on the left
expand System Information and
select Address book.
4.1 - Address Book
Click
Update
to store the settings and
continue to the next step.
3.2 - Update
Click
Open Station List
to bring
you to the Station List screen.
4.2 - Open Station List
Click
Network camera selection
to open
a new window where you may select a
registered network camera.
4.3 - Network Camera Selection
4.4 - OK
Click
OK
.