Quick Start Guide
Table Of Contents
20 | IX Quick Start Programming Guide
Call Transfer
3.1 - Upload Settings To Station
From the menu bar, select File then Upload Settings To Station.
Step 3: Setting File Upload
Uploading
The nal step in this process is uploading the setting le to each station. This program le contains the transfer
settings created in the previous steps, as well as any other setting conguration changes made.
Note that without uploading a setting le, most functions and features will be unavailable to the stations.
Scroll the window to the right
until the Start Time and End Time
Columns are displayed.
2.1 - Scroll Right
Step 2: Schedule Transfer Start and End Time
Re-transfer allows
incoming transfered calls
to be transfered to another
destination
Note:
Note:
If stations do not appear in
the Station List, verify each
station’s physical and network
connections, and refer to
System Preparation on page 2.
Enter a Start Time and End Time to
the specic day of the week or date
that the transfer is scheduled for.
2.2 - Start and End Time
3.3 - Upload Schedule
(For IX-MV7-*)
Click Schedule to open the Upload
Schedules window, and check the
box of each station in the Schedule
Transfer column.
Then, click [Start Upload] to begin the
upload process.
3.4 - Conrm Status
Using the Status column, conrm that
each station has received its setting le.
3.2 - Select Stations
Click
Select
to check all
stations in the system.
3.3 - Upload Settings (For IX-MV)
Click
Settings
to begin the upload process.
Click the Update button to
store the settings and continue
to the next step.
2.3 - Update