Operation Manual

- 20 -
Receiving a call
• The ringtone sounds.
• The video at the door station is
displayed.
• Automatic recording begins.
When receiving a call from a door station
■ To answer the call
1 Tap
.
2 Speak to the visitor.
* Speaking simultaneously may cause intermittent audio.
* Talk duration is 60 seconds by default. It can be
adjusted up to 180 seconds. (
ĺ
P. 33)
* The screen turns oႇ after approx. 45 seconds if there is
no operation.
■ To release the door
While being called or communicating, tap
.
* Available only when an electric door lock is installed at the
door and connected to the station.
* Please refer to the installation manual for details how to
connect an electric lock to the master monitor station.
■ To activate an external unit such as lightning
equipment
While being called or communicating, tap
.
* Available only when an external device, such as a light, is
connected to the station.
* Please refer to the installation manual for details how to
connect an external unit such as lightning equipment to the
master monitor station.
■ To end the communication
Tap
.
Other features
•
Screen brightness and receiving volume can be adjusted
during a call. (ĺ P. 21)
• When the ambient noise is loud enough to interrupt the
audio, the touch-to-talk method is recommended. (
ĺ
P. 2 2 )
• An automatic recording begins when receiving a call. Manual
recording is also available. (
ĺ
P. 2 2 )
* When communication ends, recording does as well.
• If the call button of the door station is pressed when the
surroundings of the door station is dark, the LED on the door
station illuminates.
NOTE:
Keep a distance of more than 20 cm (7-7/8") from person's body
while speaking.
Answering a call
USING THE STATION