Operation Manual

- 22 -
USING THIS STATION
Communication using touch-to-talk
Touch-to-talk is a method of communication in which manual
control of incoming and outgoing audio is used. Touch-to-talk
is recommended in loud or noisy environments.
Tap
.
The touch-to-talk method is enabled.
To speak, tap .
The
will change to .
* Door station audio is muted.
To listen, tap
.
* The
will change to .
* Master monitor station audio is muted.
Recording
■ Automatic recording
The station automatically records video and sounds at the door
station after the elapse of a certain period of time after
receiving a call.
While recording,
REC
changes to
REC
.
* The recording time is up to 10 seconds.
* When the communication ends, the recording also ends.
NOTE:
• Automatic recording cannot be cancelled.
• Automatic recording does not begin while monitoring a door
station. To record video while monitoring, use the manual
recording method.
• If answered with a mobile device during automatic image and
sound recording, the sound recording will end in the middle.
■ Manual recording
Video can be manually recorded during communication.
Tap
REC
when a video is displayed.
* Manual recording is possible only when
REC
is shown on
the screen.
* The recording quality is the same as automatic recording.
NOTE:
Manual recording cannot be performed during automatic recording.
More Information
• The recordings are stored in a microSDHC card.
If a microSDHC card is not installed, recordings are saved in
the built-in memory. Up to 10 recordings can be saved in the
built-in memory.
• The recording time is up to 10 seconds per recording.
• The status LED will À ash when there are recordings that
have not been played yet. The LED will turn oႇ when the
MENU screen is shown.
• Up to 1,000 recordings will be possible when using a
microSDHC card with enough capacity. When the number of
recordings is reached to the maximum, the oldest recording
will be deleted.