Operation Manual

12
■
Setting incoming call tones [CALL TONE]
You can select incoming call tones for calls from the door
stations and sub master stations.
An individual tone can be assigned from 8 tones for each door
station.
This setting is also applied to all sub master stations in this
*
system.
From HOME window, touch
1
SETTINGS
→
CALL
→
CALL TONE
.
The following are displayed:
DOOR1 ............Tone for door station 1
DOOR2 ...........Tone for door station 2
DOOR3 ............Tone for door station 3
DOOR4 ............Tone for door station 4
INTERNAL
ROOM CALL ...Tone for sub master stations
(for calling a single station only)
Select station to change incoming call tone.
2
Touch the preferred sound tone 1 to 8.
3
When selecting a sound tone, the tone is placed to
*
sample.
Use "
*
" or " " to scroll between tones.
Touch
4
ENTER
to save change.
Repeat for other stations.
5
■
Setting the call duration time [DOOR CALL
DURATION]
Setting range: 45 or 90 seconds.
This setting is also applied to all sub master stations in this
*
system.
From HOME window, touch
1
SETTINGS
→
CALL
→
DOOR CALL DURATION
.
“45 sec.” and “90 sec.” are displayed.
Touch the desired time length.
2
Touch
3
ENTER
to save change.
Talk settings [TALK]
You can make the following settings available when talking.
■
Setting the microphone on/off for a call from
a sub master station [PRIVACY MODE]
When receiving a call from a sub master station individually;
When set to "ENABLE", privacy mode is set. In this state, a
•
caller cannot hear audio from this station.
When set to "DISABLE", audio can be heard from this
•
station, allowing for 2-way communication.
■
Automatic night volume adjustment
[AUTO NIGHT VOLUME]
When set to "ENABLE", the volume of audio sent to a door
station from all the residential stations is automatically lowered
at night.
■
Night illumination of when talking
[VIDEO DOOR LED]
When set to "ENABLE", the white light LED of a door station
lights up at night or when it is dark automatically in the status
below.
When the call button is pressed on the door station.
•
When
•
TALK
is touched on the screen while monitoring the
door station
The white light LED turns off when communication ends.
From HOME window, touch
1
SETTINGS
→
TALK
.
Select "ENABLE" or "DISABLE" for each feature.
2
When the setting has fi nished, touch
3
ENTER
.