Operation Manual

25
PART NAMES USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
RECORDING AND PLAYING IMAGES
Recording
■
Automatic recording
This station automatically records images from door station.
Recording starts approximately 2 seconds after receiving a
*
call.
While recording, “
*
REC” blinks on the screen.
The recorded images are stored in the built-in memory or an
SD (or SDHC) card.
If an SD (or SDHC) card is installed, images will
*
automatically be saved to card.
Recording time and number of recorded images differ
*
depending on the media. (See the table below.)
NOTES:
Automatic recording function cannot be cancelled.
•
The display mode (Zoom/Wide) can be set. (
•
→
P. 20) You can also
switch Zoom and Wide while recording.
The status LED blinks in blue to show there are recorded images
•
that have not been played yet. The LED turns off when
PLAY
is
touched.
Automatic recording does not begin while monitoring a door
•
station. To save images while monitoring, see manual recording
below.
■
Manual recording
You can also record images displayed on the screen.
Touch
MENU
→
REC
when an image is displayed.
Manual recording is possible only when
*
MENU
is displayed
on the screen.
The recording is the same with the automatic recording.
*
However, moving the position of zoom mode and switching
Zoom/Wide cannot be made automatically.
NOTE:
Manual recording cannot be performed during automatic recording.
<Recording time and number of recorded images for a single recording action>
Storage Media Description
Built-in memory Up to 6 images are recorded (1 for each second).
* 20 times of recording data can be stored.
SD (or SDHC) card Up to 40 images are recorded (4 for each second).
Calls in.
Calls in.
1st 2nd 3rd 4th 5th 6th
2 sec.
2 sec.
1 sec.
1 sec.
10 seconds (up to 40 images)
1 sec. 1 sec. 1 sec.
1 sec. 1 sec. 1 sec. 1 sec.
Blinks