Operation Manual

6
PART NAMES
Front panel
Status LED table
Color Indication pattern Station status
Orange Blinking every 0.5 seconds Incoming call from door station
Orange Blinking every 0.5 seconds Calling a single or all sub master stations or being called
from a sub master station.
Green Solid light Communicating with a door station or a sub master station.
Green Solid light Monitoring a door station or a sub master station.
Blue Blinking every 2 seconds Recorded images have not been viewed.
Red Solid light Security mode is active.
Red Blinking every 0.5 seconds Sounding the security alarm.
Light blue Blinking every 0.5 seconds Rebooting.
SD card slot
SD (or SDHC) card
(not included)
Insert an SD (or SDHC)
card in this slot with the
label side facing front.
After inserting the *
card, confi rm that
SD
is
displayed on the screen.
When the card has an *
erasure-prevention
switch, be sure to set the
switch to the "unlocked"
position before inserting
the card.
Handset
Speaker
Call tones, audio from a station,
and alarms are heard from here.
Color LCD touchscreen
See the next page for
details.
Status LED
Indicates current status of this
station by lighting up or blinking.
See the table below for details.
Remove protective fi lm from screen
before use.
Reset button
Press this button to reboot this
station when this station gets out
of commission etc.
While being rebooted, the *
status LED blinks.
Microphone
Sends audio from this station to
other stations.
HOME button
Turns on the color LCD screen.
Hearing aid T-mode
compatibility symbol