Instruction Manual

ManualsBrandsAiphone ManualsSafetyTB-3F

O AIPHONE

832841 TB-F-l-0986 ®

COMMUNICA

TELEPHONE TYPE INTERCOM TB-F series

MODELS TB-1F (single-way) TB-3F (three-way)

TB"6F (six-way) TB“12F (twelve-way)

COMMON TALK SELECTIVE RING

- INSTRUCTIONS

NAMES AND FUNCTIONS

Receiver cradle for wall mounting, included

(7) Handset

Station selector buttons

Microphone

Case

Coil cord

(7) Receiver

Terminal cord

(2) Paging button

Terminal box

Directory card

SPECIFICATIONS

* Power source:

Current consumption:

Calling:

Paging:

Wiring:

DC 12 volt. Use PS-12A (PS-12C in North America) AC adaptor. If your system does not in

clude door station or paging system, you may use PS-12S AC adaptor.

70 mA maximum per station.

Push-button station selection. An electronic tone sounds when the selected station button is

depressed.

Use PB-1 paging adaptor in conjunction with standard paging amplifier and speakers.

Up to 17 conductors may be required. Please refer to wiring diagram showing system that

meets your requirements.

BEFORE YOU INSTALL AND OPERATE THE EOUIPMENT

* Operation;

1. DO NOT HOLD HOOK SWITCH DOWN WHILE PICKING UP HANDSET. THE CALL

TONE SOUNDS THRU THE HANDSET RECEIVER ELEMENT AND COULD CAUSE

HEARING DAMAGE.

* Installation;

1. DO NOT CONNECT ANY TERMINAL ON ANY UNIT TO AC POWER LINES.

2. Be sure to remove plug of power supply from AC outlet before you open the unit or make

wiring connections.

3. Avoid running the connecting wires thru doors, windows or between furniture, which may

pinch and disconnectect the wires.

4. The intercom equipment must be installed in as dry and dust-free environment as possible.

* Maintenance;

1. Clean your intercom equipment with a soft cloth dampened with neutral household cleanser.

Never use thinner nor benzine, etc.

2. Do not splash water on the door station by hose, etc.

- 1 -

Prohibitions and precautions -

NEVER

Summary of content (8 pages)

PAGE 1
O AIPHONE 832841 TB-F-l-0986 ® COMMUNICA TELEPHONE TYPE INTERCOM TB-F series MODELS TB-1F (single-way) TB-3F (three-way) TB"6F (six-way) TB“12F (twelve-way) COMMON TALK SELECTIVE RING - INSTRUCTIONS NAMES AND FUNCTIONS Receiver cradle for wall mounting, included (7) Handset Station selector buttons Microphone Case Coil cord (7) Receiver Terminal cord (2) Paging button Terminal box Directory card SPECIFICATIONS * Power source: Current consumption: Calling: Paging: Wiring: DC 12 volt.
PAGE 2
FEATURES * * * * * Up to 13 stations can be connected in a system. Common talk system for phone communication. (Conference calls can selectively include up to 6 stations) Separate paging channel. Paging announcement may be done separately and independently from phone communication. ECM (Electret condenser mic) provides excellent voice fidelity. Phone designed for either desk use or wall mounting. Terminal cord may be pulled out from either the top or the bottom of the phone.
PAGE 3
WIRING REQUIRED TB-6F: 11 Conductors maximum TB-12F; 17 Conductors maximum TB-l F: 5 Conductors maximum TB-3F: 8 Conductors maximum Refer to the chart below and select the proper wire gauge to meet your requirements. 24 AWG 22 AWG 20 AWG MAXIMUM COMMUNICATION DISTANCE BETWEEN MOST DISTANT PHONES 1200' 2000' 3000' MAXIMUM COMMUNICATION DISTANCE FROM PHONE TO DOORS STATION 300' 500' 700' AWG WIRE SIZE 0.5 mm 0.65 mm 0.
PAGE 4
TB-12F ALL MASTE TB-12F PHONE SYSTEM with PAGING 4- -
PAGE 5
R PHONE SYSTEM I STATION STATION STATION 10 12 9 '— ^ / I STATION 13 /— ^ ■> i
PAGE 6
VARIATIONS TO STANDARD INSTALLATIONS Any combination of TB-F series phones and accessories shown on page 2 of this manual can be intermixed to develop a communication system to meet your requirements. Installation examples below show TB-6F as master station which may be replaced by either TB-3F or TB-12F. EXAMPLE NO. 1: TB-F SYSTEM WITH ONE MASTER AND SEVERAL SUBS 1) This example shows six TB-IF phones connected to one TB-6F. 2) Paging system may be added using PB-1 adaptor.
PAGE 7
EXAMPLE NO. 3: TB-F SYSTEM WITH 2 DOOR STATIONS AND ELECTRIC DOOR RELEASE • Maximum of 2 door stations may be connected to up to 12 phones per system. NOTES: (1) DB-U door station adaptor must be connected directly to PS-12A (PS-12C) power supply. (2) Be sure to connect and [P] terminals on each phone for communication with door station (paging may be added in a system incorporating door station). (3) Do not use #1 terminal on any TB-F phone for connecting CF terminal on DB-U.
PAGE 8
OPERATION CALLING; Pick up the handset and momentarily depress the selector button of desired station. RECEIVING; An incoming call is announced by an electronic tone. Pick up the handset and begin speaking. When called from door, pick up the handset, press the selector button corresponding to door station and begin speaking. NOTE; Do not depress paging button while talking with other phone.