0311 A OI GTW-LC SERVICE MANUAL GT System Lift control adaptor GTW-LC INSTALLATION & OPERATION MANUAL
CONTENTS PRECAUTIONS General Prohibitions Prohibition to Dismantle the Unit Prohibition on Subjecting the Unit to Water 1 SYSTEM CONFIGURATION System Configuration ������������������������������������������������������������������� 3 Wiring Distance ������������������������������������������������������������������������������ 3 2 CONTENTS Contents ��������������������������������������������������������������������������������������������� 4 3 NAMES Names ��������������������������������������������
1 1-1 1-1 SYSTEM CONFIGURATION System Configuration a. GT expanded system (For details, see the GT Series Installation & Operation Manual.) Make sure to use GT-BCX, GT-DA(-L), GT-NS(-V), GT-DM(V). [1] Expanded Bus control unit GT-BCX [2] Distribution terminal (junction): Not included [3] Lift control adaptor GTW-LC Relay contacts: 20 [4] Bus control unit GT-BC [5] Power supply PS-2420DIN etc.
2 3 CONTENTS NAMES [3] GTW-LC Contents Lift control adaptor GTW-LC (mounting bracket is included) [1] [3] [2] [4] Names [1] [2] [3] [4] -4- Bus line terminal ID setting switch Relay output terminal Lock release lever
4 MOUNTING [1] [1] GTW-LC [2] Mounting [1] Din rail [2] Lock release lever Mount GTW-LC to the Din rail. * To remove GTW-LC, pull the lock release lever down. GTW-LC cannot be mounted directly to the wall surface.
5 WIRING [3] #8 RY1 1P NP RY20 1P NP GT-BCX 1P NP GTW-LC R1 R2 to Lift controller Max. 8 [3] #1 RY1 GT-BCX 1P NP 1P NP #9 to #16 (max.
Wiring a. GT expanded system (For details, see the GT Series Installation & Operation Manual.) [1] Expanded Bus control unit GT-BCX [2] Distribution terminal (junction): Not included [3] Lift control adaptor GTW-LC Maximum 16 adaptors (up to 8 adaptors per trunk) • ID: ID setting switch (factory setting is #1) Make sure to set corresponding ID number. [4] Bus control unit GT-BC [5] Power supply PS-2420DIN etc.
6 6-1 Setup tool SETTING UP * Completing settings with the setup tool is required. 1. Install the setup tool in the PC (Windows 7/VISTA/XP ®) beforehand, and then enter the resident information. * For details on the setup tool, refer to the GT Series Installation & Operation Manual. Save programmed data and resident information data to your PC is recommended. 2. Connect the PC terminal of GT-BCX to the PC with USB cable (A-B type) (included with GT-NS(-V), GT-MK, GT-DM(V)). * PC requires USB output.
6-2 [1] 6-3 [2] [3] [1] [4] [5] Lift Control 1 [1] [2] [3] [4] GTW-LC ID SelectON orOFF for the GTW-LC connection. SelectN.O. orN.C. for the Output Type. Set the Timer. The time setting range is1 to 600 sec. (one second increments) [2] Lift Control 2 [1] The resident information that has been entered will be displayed. [2] Set which relay will activate in the corresponding GTW-LC for each residence. The setting range is1 to 20.
6-5 1 7 7-1 OPERATIONS 1 2 G 4 M H I P W T R K T 8 U C 3 L V W 0 E 6 M P 7 Q B 5 J NO 9 D J S 2 E F 6 X Y 0 A G K L 8 U V 1 3 5 S B C D H I 7 N F O 9 X Y Z A 4 Z 1 Q R 2 2 Residential Station or Security Guard Station Door Release 3 1. Press the door release button at the residential station or security guard station while in communication with the entrance station that made a call. 2.
8 TECHNICAL PRECAUTIONS 9 SPECIFICATIONS Technical precautions Specifications • Operating temperature: 0 °C to +40 °C (+32 °F to +104 °F) • Repair requests: When units do not operate properly, contact a qualified technician for service. • Power supply: Supplied by GT-BC • Relay contacts: 20 AC/DC 24 V, 500mA, N.O./N.C. dry closure operation time accuracy ±2% • Wiring: single-pair cable • Type of cable: Pair cable (solid wire not stranded), polyethylene insulated, diameter 0.65 ~ 1.
WARRANTY Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty.