User's Manual

7. How do I find information about the Bluetooth hardware
attached to my computer?
In the Bluetooth Configuration Panel, select the Hardware tab (see Figure 7).
8. How do I test a network access connection?
If the client is hardwired to the LAN, unplug the hardwired connection to ensure that
the test checks the wireless connection rather than the hardwired connection. If the
server has access to the Internet, open a browser on the client and connect to the
World Wide Web.
9. Why do I get an unknown port message when I attempt to use
a Bluetooth serial port?
The "unknown Port" error message usually means an attempt was made to connect a
port that was in use. Additional Bluetooth Serial Ports can be added if they are required.
5. How do I determine the version number of the Bluetooth
specification that the host controller interface (HCI) complies
with?
6. How do I determine the version number of the Link Manager
Protocol (LMP)?
In the Bluetooth Configuration Panel, on the Hardware tab (see Figure 7), in the Device
Properties section, the fifth entry provides Bluetooth Specification compliance information for
the Host Controller Interface.
The sixth entry contains the Specification Revision information for the Host Controller
Interface, if appropriate.
In the Bluetooth Configuration Panel, on the Hardware tab (see Figure 7), in the Device
Properties section, the seventh entry provides Link Manager Protocol version number
information. The eighth entry contains the Link Manager Protocol (LMP) sub-version number
information, if appropriate. BTW Configuration & User Guide Troubleshooting.