Option1 Disconnection (For Wireless/) Disconnection Unpair Button Keep pressing the unpair button for at least 4 seconds and the tablet will be disconnected.
Option2 Disconnection 4. Disconnection (For Wireless) 29 1 Double click the My Bluetooth Places on your desktop. 2 Click View devices in range. Now your computer is searching for all the Bluetooth devices in range. Please wait. 3 Your computer has found the Bluetooth Tablet when icon appears. This icon indicates that the Bluetooth Tablet is connected to PC. 4 Click Disconnect. Now you can safely disconnect your Bluetooth Tablet.
Option3 Disconnection (For Wired) Disconnection Unplug the USB cable and the tablet will be disconnected.
5 Environment 5. Environment Environment always influences the receiving quality of your tablet. The best environment for tablet is where no other cordless products are functioning, such as microwave ovens and dish dryers. 31 Cement walls and wooden walls absorb radio wave and decrease receiving quality. Open space without barriers is the best environment for your tablet.
Maintenance Maintenance 6 1. Do not drop, puncture or disassemble the tablet. 2. Remove batteries during long periods between use. 3. Avoid all contact with water and dry hands before using. 4. Do not expose the tablet to high temperature or leave it in direct sunlight. 5. Avoid pressing hard on the tablet body.
7 Troubleshooting 7. Troubleshooting What is the Bluetooth Adapter software that I am installing? Many Bluetooth Adaptors use the Bluetooth Adapter software to work with the adaptor and connect with other Bluetooth devices. 33 When I search for my tablet, many devices appear that I do not recognize. Because Bluetooth has a range of up to 100 metres, you will detect devices beyond the tablet that you are searching for. My tablet connection drops out when I use my cordless phone. Bluetooth uses the 2.
My tablet still does not light up, when I switch it on. You will need to replace the batteries of the tablet. It requires 2 AA batteries. Troubleshooting The light on my tablet does not light up. You may have accidently pressed the unpair button located just above the right hand corner of the active area of your tablet. If so, switch the tablet off for three seconds, and on again. Have your tablet within 2 meters. You tablet should light up and be usable. My tablet lights up, but my pen does not respond.
Specification 8. Specification Tablet 35 Product Dimension: 201*176*58 Working Area: 152*114 Resolution: 500 Lines per inch (LPI) Maximum Position: X:3000, Y:2250 Macro Key: None Accuracy: +/- 2 mm Product Weight: 444g Data Interface: USB, Bluetooth Unmarry Switch: Continually push 3 seconds Battery: AA rechargeable battery*2 Power Consumption in Bluetooth Mode: -Pen in proximity:150mA, 3V/ 195mA, 2.4V -Pen out of proximity: 110mA, 3V/150mA, 2.
Bluetooth Module: Fully compliant with Bluetooth v1.1 Module type: Bluetooth v1.1 class B Module Chip: Microtune Module Interface: Serial Port Interface (SPI) Module Clock: 1.
