Operation Manual

39
using pc camera using pc camera
Using PC Camera
Installing the software
The PC camera software is included in the camera driver, and
therefore you should install the driver before using the PC
camera function. If you have not yet installed the driver, see
page 32 for details on the installation.
Starting the application
1 Turn on the camera and
connect the camera to your
computer.
Turn on the camera, and then connect
the camera to your computer using the
accessory USB cable. See page 34 for more
details.
2 Switch to Camera mode.
Press the Menu button to bring up the
options menu. Use the Direction buttons
to select the Camera item and press the
OK key to confirm.
The default is set to “Disk” mode, if you
would likt to set other modes, please
refer to “USB Mode” section on page 30
for more information.
If you want to use the Video Conferencing function, please install
programs such as Netmeeting to serve the purpose.
MOD
E
M
E
N
U