Operation Manual

9
EN
Slow-motion play (DVD)
Press the Slow button on the remote control during playback, and the disc will be
played at 1/ 2 normal speed at first. Each time the Slow button is pressed, the play
speed becomes slower (down to 1/7 normal speed).
Press the Play button to resume normal play.
Repeat
Press the Repeat 1/ALL button during play to repeat playing one chapter/title or all
chapters (DVD); repeat playing a track or all tracks (CD).
Press the Repeat A-B button to repeat playing the specified points (A-B).
Search for preferred scene
Press the Search button during play and highlight the item to be played (Title,
Chapter, or Chapter time) using navigation buttons.
Input the desired number or time via the numeric buttons.
Press the OK button to confirm and the playback from the located scene
starts.
To exit search menu, press the Search button.
Program play (up to 16 memories)
Press the Program button during playback to display the program menu.
Select location(s) to be memorized via navigation buttons and then enter
desired Titles/Chapters numbers via numeric buttons.
Note: Inputting leading zero is not necessary. If the chapter/title/track number
is behind the cardinal 10, press the +10 first and then another digit. Some
figure input may be useless because it is greater than total title/chapter/track
number on the disc.
Example: Track 3, press “3”
Track 12, press “+10” and then “2”
Track 21, press “+10” twice, and then “1”
To start programmed playback, select the <PLAY> item on the menu and
press the OK button. Press the Program button again to exit programming.
To clear all items, select the <CLEAR> item on the menu and press the OK
button.
You can also cancel program mode by clearing all the items in the program
menu.
1.
2.
3.
4.
1.
2.
3.
4.
5.