Operation Manual

11
EN
MP3/MPEG4 playback
Load the MP3/MPEG4 disc onto the disc tray and the screen will show all its
folders after a few seconds.
Select your desired folder using the navigation buttons and then press the OK
button to confirm.
The files in the folder are displayed. Select your favorite song via navigation
buttons and press the OK button to start playback.
Press the Next or Previous button to select track directly.
Press the Repeat button to change play mode.
External memory media operation (USB stick & SD/MMC card)
Prepare the player for External Memory media operation:
Make sure the power is connected. Slide the Function switch to DVD/USB/
CARD position and the power indicator will light up.
Plug a USB stick filled with music or video files into the USB port, or insert the
SD/MMC card filled with music or video files into the SD/MMC card slot.
Press and hold the Stop button on the device (DVD/USB/Card button on
the remote control) to make selection among DVD, USB stick, and memory
CARD.
You may play the files stored in the storage media much in the same way as
you do the MP3 disc.
Projector on/off button
Press the Projector on/off button to turn on or turn off the projector.
TV system
Press P/N button during DVD mode to select the TV system.
The <PAL> option is suitable for pan-European regions, China, Japan, and Hong
Kong. The <NTSC> option is suitable for America, Taiwan, Japan, and Korea
areas.
1.
2.
3.
4.
5.
1.
2.
3.
4.