Operation Manual

12
EN
Initial Settings
Common procedures for initial settings
You can set up your preferred settings for your player. Once the settings are done
they are retained in the memory of the player until otherwise modified.
Press the Setup button.
Use the navigation buttons to select the item you want to modify. Menu items
with further setting options will display sub-items on the screen. Use the
navigation buttons to make changes and press the OK button to confirm your
modifications.
Use the navigation buttons to switch to another setting on the main setting
page.
Press the Setup button to exit main setting page.
1.
2.
3.
4.
System setup
TV SYSTEM - it is used to select the TV mode. Please select this option as
per your TV set. The <PAL> option is suitable for pan-European regions,
China, Japan, and Hong Kong. The <NTSC> option is suitable for America,
Taiwan, Japan, and Korea areas.
SCREEN SAVER - when the device is not in use for several minutes, a
running DVD logo will move across the TV screen to protect the TV Screen.
Options: ON: screen saver is enabled; OFF: screen saver is disabled.
TV TYPE - it is used to select the TV scan mode. Please set as per your TV
set.
Options: 4:3PS : Normal Pan & Scan mode (Imagine a 16:9 picture with the
left and right parts trimmed to fit into a 4:3 frame.)
4:3LB : Normal Letterbox mode (Imagine a 16:9 picture put into a
4:3 frame, with black bars to the top and buttom.)
4:3PS 4:3LB
PASSWORD - input password to unlock the system. The steps are as follows:
1) Enter SYSTEM SETUP.
2) Select the PASSWORD item by pressing the down navigation button, and
then press the right navigation button to select the input box.
•
•
•
•