Operation Manual

45
Appendix:A
When using the camera:
Problem Cause Solution
The camera can
not be powered on
normally.
The battery is out of
power.
Replace the battery.
The battery is incorrectly
installed.
Re-install the battery.
The camera is still
powered on, but the
LCD monitor does
not display.
If the camera stays
idle over one minute,
the LCD monitor will
automatically shut down
to save power.
Press any button except the
power button to reactivate
the display.
Can not take
pictures or video
clips when pressing
the Shutter or
Record button.
Out of memory.
Free some space from the
SD/MMC card or the internal
memory.
The camera is
recharging the flash
strobe.
Wait until the flash strobe is
fully charged.
Using a “protected” SD
card.
Set the SD card to be
writable.
The LCD monitor
displays “MEMORY
ERROR” or “CARD
ERROR” message.
Or the camera
cannot read the
memory card.
The format of the
memory card is not
compatible with the
camera.
Use the camera “Format”
function to format the card.
The memory card is
corrupted.
Replace the memory card
with a new one.
Troubleshooting