manual

Loading the battery

Note8SRQXVLQJWKHEDWWHU\IRUWKH¿UVWWLPH\RXDUH

recommended to fully discharge and then charge the battery for 8

hours to ensure its lifecycle.

1. Slide open the battery compartment cover as indicated.

2. Place the accessory Li-Ion battery into the compartment. Note

that the metallic contacts must be aligned with the contacts in the

compartment.

3. Replace the cover.

Charging battery

1. Connect one end of the cable to the USB port of the camcorder.

2. Plug the AC adapter to a wall outlet, or connect the other end of the USB

cable to the PC that has been powered on.

3. The charge starts. The LED indicates red light during charging. When the

battery is fully charged, the LED light will go out.

Note: When using a PC to charge the battery, do not power on the

camcorder or the charge will stop.

Inserting the SD/SDHC/MMC card (optional)

1. Slide open the battery compartment cover.

2. Insert the card in the direction of indication until it reaches the end of the slot.

3. When using a SD card, the built-in memory will become inaccessible.

4. To remove the SD card, gently push the card until it pops up.

open