Operation Manual

10
Troubleshooting
Problem Cause Solution
Cannot turn on
the unit
1. Low battery power.
2. Battery placed at wrong
polarities.
Replace or install the battery correctly.
Photos can not
be saved when
taking pictures.
The memory card or built-in
memory hasn’t been formatted
properly.
Format the memory in SETUP mode of
the camera. Please refer to section 5.3.
Flash does not
work.
Battery Power is too low. Replace with new ALKALINE battery.
The photos are
over exposure
Set the ash light to force mode
in bright environment.
Set the Flash light to Auto Mode .
The photos are
blurry
1. The DV (camera) is not held
steadily
2. The lens of DV (camera) is
dirty.
3. The DV (camera) is Set to
wrong macro mode.
1. Hold the DV (camera) steadily until it
beeps when taking video or photo.
2. Clean the lens with soft dry cloth.
3. Set the macro mode according to the
distances of subject.