User`s manual

4.1.5. Wake on LAN

It will manage the list for wake on LAN and test the function.

After adding MAC address of remote PCs into MAC list, it will allow remote control the

PCs. However, it’ s a l s o r e q uired to have hardware support for remote PCs to implement

this function.

Step 1 Select ViewPower Configuration >> Wake on LAN. Refer to Diagram 4-7.

Diagram 4-7

Step 2 Add: Enter MAC address and click “Add” button to add in MAC List. Delete:

Select one from list and click “Delete” button. Test: Select one from list and

click “Test” button. Then it will execute Wake-on-LAN test.

NOTE: The MAC address format example: 01-1F-C6-C7-E0-08.

4.2. UPS Setting

4.2.1. Local Shutdown

It’s shutdown setting for local PC which is directly connected to monitored UPS with

communication port. This configuration enables system shutdown of local PC or to

remote shut down PCs which are powered by monitored UPS.

Step 1 Select UPS Setting >> Local Shutdown or click shortcut icon . Refer to

Diagram 4-8.