User`s manual

20
 A c c e p t s h u t d o w n c o m m a n d f r o m r e m o t e s y s t e m : W h e n c l i c k i n g t h e c h e c k b o x , i t
accepts shutdown command from specific remote PCs. Please enter IP address
of remote systems in blank column and click “Add” button to add into list.
 UPS shutdown while system shutdown: When click the checkbox, monitored
UPS will shut down after local system shuts down. The UPS shutdown time will
be later than system complete shutdown time. T h e d efault setting is clicked. But
users can choose to shut down the system without shutting down the monitored
UPS.
Power-off option: Selecting power-off method for above shutdown system.
 Shutdown: When clicking the checkbox, the selected system will shut down. The
default setting is clicked.
 Sleep mode: When clicking the checkbox, selected system will suspend the
system instead of a normal shutdown. But this function is only supported by
Windows 2000 or higher on supported hardware.
Delay time to shutdown system: Enter the delay time to shut down the
operating system. The value range is from 1 to 99 minutes.
On shutdown execute file: Enter the path of executed file.
Warning Dialog Setting:
 Po p -up dialog before shutdown: Timer setting for pop-up warning dialog
displayed in local PC. Local PC will pop up a warning dialog before system
starts to shut down. The range is from 1 to 999 seconds.
 Warning dialog interval: Reminding dialog interval setting. This setting also
applies for UPS shutdown because of power failure. The range is from 1 to 999
seconds.
4.2.2. Remote Shutdown
This configuration i s t o r e m o t e s h u t down specific PCs w h i c h a r e p o w e r e d b y m o n i t o r e d
UPS.
Step 1 Select UPS Setting >> Remote Shutdown. Refer to Diagram 4-9.