User`s manual

22
Step 1 Select UPS Setting >> Parameter Setting. Refer to Diagram 4-10.
Diagram 4-10
Step 2 Select the functions by clicking “Enable” or “Disable” button. Or change the
numbers by clicking up-down arrows or modify the numbers directly in the
number column.
Step 3 Click “Apply” button to save the settings. Each function setting is saved by
clicking each “Apply” button.
NOTE1: Any functio ns w hic h ar e n o t s up p o rte d b y U PS w il l n o t b e a ble t o a cc es s.
NOTE2: Click “Default” button to recover the default setting.
 Alarm at bypass mode: If enabled, UPS alarms when it’s working at bypass
mode. Vice versa.
 Alarm at battery mode: If disabled, UPS will not alarm when it’s working at
battery mode. Vice versa.
 Auto reboot: If enabled, UPS will auto recover when AC is recovering. Vice
versa.
 B y p a s s w h e n U P S i s o f f : I f e n a b l e d , A C w i l l d i r e c t l y p r o v i d e p o w e r t o c o n n e c t e d
devices when UPS is off. Vice versa.
 Converter mode: If enabled, the UPS will operate in converter mode. Vice versa.
 E C O m o d e : I f e n a b l e d , t h e U P S w i l l operate in E C O m o d e when input voltage is
within acceptable range. Vice versa.