User Guide

1. Turn on your speakers. When the
speakers are connected to each other,
pressing any of the power buttons will
turn them all on. If separated you will
need to turn on each one individually.
Do you see a little green light on the
back of each one? Good. That means
they’re all on and connected.
2. Now it’s time to connect your
AirBase to whatever Bluetooth®
enabled device you’d like to
use. You’ll hear a friendly voice
telling you your speakers are in
“pairing mode.”
4. You’re all set. Now you can
separate the speakers and put
them wherever you want (just
so long as they’re within 75’ of
the AirBase).
3. Your smart phone or tablet
will show a list of devices
nearby; just choose “Air.” Now
you’ll hear a friendly voice
confirming you’re paired.
Charging Your Speakers
You’re anxious to take your new speakers out for a
spin. We get it. But before you do, charge them for
four hours. As long as the speakers are connected to
each other you can plug the cable into any micro
USB port.
Enjoying Your Speakers
The speakers work best if the AirBase is within 32’ of your smart device. If you’re out of range or your wireless connection is weak, your
music may cut out briefly. Don’t worry: Please make sure Bluetooth® is enabled on your device before you start the pairing process.
Air
*pairing
mode*
*pairing
mode*
2