Air Comm Systems, Inc. Receive Audio Indicator Panel Installation Manual ACS 296 AirComm Revision 1.1 Air Comm Systems Inc. 1640 W. Acoma Blvd., Suite A-118 Lake Havasu City, AZ 86403 Airborne Audio Products Phone (928) 854-5402 FAX (928) 854-8919 E-Mail aircomminc@aol.
ACS 296 Installation Manual Table of Contents n Installation General Operating Specifications Physical Dimensions Interface Schematic n Instructions for Continued Airworthiness n Warranty Information Air Comm Systems Warranty n Page 3 Page 4 Page 5 Page 6 Page 7 Supplemental Information Product Schematics Air Comm Systems, Inc.
ACS 296 Installation Manual General Operating Specifications n Unit Description The ACS 296 Receive Audio Indicator Panel is a compact, Dzus mounted unit that provides a visual status of which receive audios are active in the aircraft audio system. The ACS 296 is designed to be interfaced with a Single or Dual Channel Audio Mixer Panel and installed in close proximity to that panel for easy reference by the user.
ACS 296 Installation Manual Physical Dimensions n Physical Dimension Outline The ACS 296 is designed to be Dzus mounted in close proximity to the Audio Mixer Panel it will interface with. The unit should be installed in the aircraft using the DC09-USFS-F Installation kit that was included. The above outline drawing of the unit with dimensions will facilitate the installation.
ACS 296 Installation Manual Interface Schematic n Connector Schematic The ACS 296 wiring harness should be constructed of Tefzel aircraft wire (M22759/16 grade). Power and ground wires should be 22 AWG. Shielded wires should be used where noted. Adequate protection against wear and chafing should be taken by using a braided cable sleeving or jacket.
ACS 296 Installation Manual Continued Airworthiness Insrtuctions Instruction for continued airworthiness forReceive Audio Indicator Panel Model ACS-296. GENERAL DESCRIPTION: The ACS 296 Receive Audio Indicator Panel is a compact, Dzus mounted unit that provides a visual status of which receive audios are active in the aircraft audio system. The ACS 296 is designed to be interfaced with a Single or Dual Channel Audio Mixer Panel and installed in close proximity to that panel for easy reference by the user.
ACS 296 Installation Manual Warranty Information n Warranty Information Air Comm Systems, Inc. warrants each new product to be free from defective material and workmanship and agrees to remedy any defect or to furnish a new part in exchange for any defective unit provided an examination discloses such defect occurred under normal use and service, and provided the defective unit is delivered to us, with transportation charges prepaid, within 1 year from the date of acceptance of equipment by the owner.