INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS
Door Louvers
MoDeL ADL/sDL
Description
Heavy Duty Extruded Aluminum or Steel construction designed to allow
the transfer of air through a door while also maintaining privacy. Ideal
for use with 1-3/8" to 2-1/4" thick wood or metal doors.
Installation
1. Measure inside dimensions of unit to ensure proper fit.
2. Cut hole in door in accordance with door manufacturer’s
recommendation.
3. Place the door louver (Figure 1) into the opening.
4. Insert and start all screws before tightening.
5. Tighten all screws using a crisscross pattern. Use caution to avoid
stripping or over tightening screws.
6. Place the Slip Fit Collar (Figure 2) on the opposite side of door. Push
into place and secure it using the same procedure as above.
METAL
DOOR
DOOR
WOOD
1-1/4
DOOR CUTOUT
DOOR
LOUVER
SLIP FIT
COLLAR
Figure 1 - Door Louver
Figure 2 - Slip Fit Collar
1.281
0.250
1.250
5" TYP.
CENTERED
COUNTER SINK FOR # 8 FLAT SCREW
SLIP FIT COLLAR
0.625
0.875
0.036
0.250
DOOR LOUVER
1.125
90°
8" TO 14" ( 1 ) MOUNTING HOLE PER. SIDE
16" TO 20" ( 2 ) MOUNTING HOLES PER SIDES
20" TO 24 ( 3 ) MOUNTING HOLES PER SIDE
SIZE ID W X H OD W X H
OD-W
ID-H
ID-W
OD-H
.562 TYP.
12" X 12"
13-7/8 X 7-3/4
14-1/4 X 14-1/8
14" X 8"
11-7/8 X 11-3/4
16-1/84X 10-1/8
14" X 12" 13-7/8 X 11-3/4 16-1/4 X 14-1/8
16" X 8" 15-7/8 X 7-3/4 18-1/4 X 10-1/8
16" X 16" 15-7/8 X 15-3/4 18-1/4 X 18-1/8
18" X 12" 17-7/8 X 11-3/4 20-1/4 X 14-1/8
20" X 10" 19-7/8 X 9-3/4 22-1/4 X 12-1/8
20" X 12" 19-7/8 X 11-3/4 22-1/4 X 14-1/8
20" X 16" 19-7/8 X 15-3/4 22-1/4 X 18-1/8
20" X 20" 19-7/8 X 19-3/4 22-1/4 X 22-1/8
24" X 12" 23-7/8 X 11-3/4 26-1/4 X 14-1/8
24" X 16" 23-7/8 X 15-3/4 26-1/4 X 18-1/8
24" X 18" 23-7/8 X 17-3/4 26-1/4 X 20-1/8
24" X 24" 23-7/8 X 23-3/4 26-1/4 X 26-1/8
1.187
DOOR LOUVER ALUM & GALV.
ROMULUS MI. 48174
AIR CONDITIONING PRODUCTS CO.
± 0.5°
ANGULAR
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED:
.XXX ± .010
.XX ± .05
TOLERANCES
DECIMALS
B
DESIGN
E.K.
CHECKED
DRAWN
11/09
SIZE FSCM NO.
DATE
SHEET
OF
11-09 DOOR LOUVER
DWG. REV
MATL:
LOUVER .036 ALUM. / STEEL PAINTED
FRAME .033 ALUM / STEEL PAINTED
ALUM : ANODIZED
STEEL: POWERED COATED GRAY
1.281
0.250
1.250
5" TYP.
CENTERED
COUNTER SINK FOR # 8 FLAT SCREW
SLIP FIT COLLAR
0.625
0.875
0.036
0.250
DOOR LOUVER
1.125
90°
8" TO 14" ( 1 ) MOUNTING HOLE PER. SIDE
16" TO 20" ( 2 ) MOUNTING HOLES PER SIDES
20" TO 24 ( 3 ) MOUNTING HOLES PER SIDE
SIZE ID W X H OD W X H
OD-W
ID-H
ID-W
OD-H
.562 TYP.
12" X 12"
13-7/8 X 7-3/4
14-1/4 X 14-1/8
14" X 8"
11-7/8 X 11-3/4
16-1/84X 10-1/8
14" X 12" 13-7/8 X 11-3/4 16-1/4 X 14-1/8
16" X 8" 15-7/8 X 7-3/4 18-1/4 X 10-1/8
16" X 16" 15-7/8 X 15-3/4 18-1/4 X 18-1/8
18" X 12" 17-7/8 X 11-3/4 20-1/4 X 14-1/8
20" X 10" 19-7/8 X 9-3/4 22-1/4 X 12-1/8
20" X 12" 19-7/8 X 11-3/4 22-1/4 X 14-1/8
20" X 16" 19-7/8 X 15-3/4 22-1/4 X 18-1/8
20" X 20" 19-7/8 X 19-3/4 22-1/4 X 22-1/8
24" X 12" 23-7/8 X 11-3/4 26-1/4 X 14-1/8
24" X 16" 23-7/8 X 15-3/4 26-1/4 X 18-1/8
24" X 18" 23-7/8 X 17-3/4 26-1/4 X 20-1/8
24" X 24" 23-7/8 X 23-3/4 26-1/4 X 26-1/8
1.187
DOOR LOUVER ALUM & GALV.
ROMULUS MI. 48174
AIR CONDITIONING PRODUCTS CO.
± 0.5°
ANGULAR
DO NOT SCALE DRAWING
DIMENSIONS ARE IN INCHES
UNLESS OTHERWISE SPECIFIED:
.XXX ± .010
.XX ± .05
TOLERANCES
DECIMALS
B
DESIGN
E.K.
CHECKED
DRAWN
11/09
SIZE FSCM NO.
DATE
SHEET
OF
11-09 DOOR LOUVER
DWG. REV
MATL:
LOUVER .036 ALUM. / STEEL PAINTED
FRAME .033 ALUM / STEEL PAINTED
ALUM : ANODIZED
STEEL: POWERED COATED GRAY
LIMITED WARRANTY
All products manufactured are warranted by Air Conditioning Products Company (ACP) to be free from original defects in workmanship for a period of one year from date of shipment, under conditions of
normal use and service. ACP will replace or repair any defective parts upon return to our plant, freight prepaid. This limited warranty will, in no way, include the payment of labor charges for field replacement
of defective parts, installation, repairs of adjustments, or any other work done. Back charges will not be accepted for any reason unless ACP has given prior written permission, nor will ACP be responsible for
consequential damages of any character, no limited warranty expressed or implied will supersede the foregoing.
Manufactured for Air Conditioning Products Co.
30350 Ecorse Road • Romulus, MI 48174
acpshutters.com
Aluminum Steel
Model Model Hole Opening Actual OD
No. No. W H W H
ADL-8x8 SDL-8x8 8 1/2" 8 1/2" 10 1/4" 10 1/8"
ADL-10x4 SDL-10x4 10 1/2 4 1/2 12 1/4 6 1/8
ADL-12x8 SDL-12x8 12 1/2 8 1/2 14 1/4 10 1/8
ADL-12x12 SDL-12x12 12 1/2 12 1/2 14 1/4 14 1/8
ADL-14x8 SDL-14x8 14 1/2 8 1/2 16 1/4 10 1/8
ADL-14x12 SDL-14x12 14 1/2 12 1/2 16 1/4 14 1/8
ADL-16x8 SDL-16x8 16 1/2 8 1/2 18 1/4 10 1/8
ADL-16x16 SDL-16x16 16 1/2 16 1/2 18 1/4 18 1/8
ADL-18x12 SDL-18x12 18 1/2 12 1/2 20 1/4 14 1/8
ADL-20x10 SDL-20x10 20 1/2 10 1/2 22 1/4 12 1/8
ADL-20x12 SDL-20x12 20 1/2 12 1/2 22 1/4 14 1/8
ADL-20x14 SDL-20x14 20 1/2 14 1/2 22 1/4 16 1/8
ADL-20x16 SDL-20x16 20 1/2 16 1/2 22 1/4 18 1/8
ADL-20x20 SDL-20x20 20 1/2 20 1/2 22 1/4 22 1/8
ADL-24x12 SDL-24x12 24 1/2 12 1/2 26 1/4 14 1/8
ADL-24x16 SDL-24x16 24 1/2 16 1/2 26 1/4 18 1/8
ADL-24x18 SDL-24x18 24 1/2 18 1/2 26 1/4 20 1/8
ADL-24x24 SDL-24x24 24 1/2 24 1/2 26 1/4 26 1/8