Use and Care Manual

Operation

PULL CHAIN OPERATING INSTRUCTIONS

Install two pull chains and fobs (MM) onto the pull chains located

in the switch housing (J). Turn on the power and check the

operation of the fan.

The pull chain controls the fan speed as follows:

1 pull - High, 2 pulls - Medium, 3 pulls - Low, and 4 pulls - Off.

Speed settings for warm or cool weather depend on factors such

as the room size, ceiling height, and number of fans.

The light pull chain controls the light kit: "ON" and "OFF".

NOTE: Wait for the fan to stop before reversing the direction

of the blade rotation.

REVERSE SWITCH OPERATING INSTRUCTIONS

The reverse switch is located on the surface of the switch housing.

This switch controls directions: forward (switch down) or reverse

(switch up).

Warm weather - (Counterclockwise Direction) A downward air ﬂow

creates a cooling effect. This allows you to set your air conditioner

on a warmer setting without affecting your comfort.

Cool weather - (Clockwise Direction) An upward air ﬂow moves

warm air off the ceiling. This allows you to set your heating unit on

a cooler setting without affecting your comfort.