Instructions / Assembly

11
Installing the Light Kit
While holding the light plate under your fan,
make the polarized plug connections:
- White to white
- Blue to black
Install the light plate onto the switch housing
with 3 screws provided. Be sure to tighten all
screws. (Fig. 17)
Pass the two pull chains on the switch housing
through the chain holders located on the light
fitter, install the fobs to the pull chains. (Fig.
18)
Install 2x13W (Max.) bulbs ( provided) and
glass shade with four thumb screws, do not
over tighten. (Fig. 18) NOTE: CFL bulbs are
NOT dimmable.
Restore power and your light kit is ready for
operation.
If the light kit does not work, turn off the
electricity and lower either canopy or decora-
tive housing on your ceiling fan to make sure
the blue wire is connected to the black house-
hold wire.
1.
2.
3.
4.
5.
6.
NOTE
LIGHT BULBS HAVE NO WARRANTY; CAN BE
PURCHASED AT ANY HOME DEPOT STORE.
BEFORE STARTING INSTALLATION, DISCON-
NECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE
AT FUSE BOX. TURNING POWER OFF USING
THE FAN SWITCH IS NOT SUFFICIENT TO
PREVENT ELECTRIC SHOCK.
NOTE
Switch
Housing
Light
Plate
Screws
Wire Connection
Figure 17
Figure 18
Screws
Pull Chain
Chain Holder
Glass Shade
Bulbs
Fan without Light Kit
(Optional)
Your fan is designed with light kit, we also
prepare a empty switch box cover for your
choice in case you intend to install the fan
without light kit, attach the switch housing
cover to the switch housing with the screws
provided. ( Fig.19)
1.
Figure 19
Screws
Switch
Housing
Switch
Housing
Cover