Specifications

www.airkinglimited.com
Extended Life
What makes the High Performance Series unique is the UL Listed
Molded High Impact Plastic Housing. This provides multiple benefits.
“Traditional” bath fan housings are fabricated from steel which involves
bending and welding. This is a more expensive process and over the life
of the fan welds can break, causing the fan to operate much louder or
even with a rattling sound. Metal housings reverberate and echo noise.
Because the High Performance Series is an all plastic housing, there
are no welds that will break and the plastic is a natural sound absorbent
material as opposed to the amplification you can get from metal.
Plastic Does Not Rust
If you live anywhere near salt water, or the unit will be used in high
moisture areas, this fan is an almost must. An additional benefit of the
UL Listed Molded High Impact Plastic Housing is that it doesn’t rust,
giving the unit a longer life.
Installation is a SNAP-IN
From an installation standpoint, it can’t be easier. The included Snap-
In bracket is nailed or screwed in place, then the housing snaps into
position, leaving two hands for wiring. This is so simple, you can even
replace an existing fan, without having to rip out sections of ceiling or
climbing into the attic.
10
Extended Life
What makes the High Performance Series unique is the UL Listed
Molded High Impact Plastic Housing. This provides multiple benefits.
“Traditional” bath fan housings are fabricated from steel which involves
bending and welding. This is a more expensive process and over the life
of the fan welds can break, causing the fan to operate much louder or
even with a rattling sound. Metal housings reverberate and echo noise.
Because the High Performance Series is an all plastic housing, there
are no welds that will break and the plastic is a natural sound absorbent
material as opposed to the amplification you can get from metal.
Plastic Does Not Rust
If you live anywhere near salt water, or the unit will be used in high
moisture areas, this fan is an almost must. An additional benefit of the
UL Listed Molded High Impact Plastic Housing is that it doesn’t rust,
giving the unit a longer life.
Installation is a SNAP-IN
From an installation standpoint, it can’t be easier. The included Snap-
In bracket is nailed or screwed in place, then the housing snaps into
position, leaving two hands for wiring. This is so simple, you can even
replace an existing fan, without having to rip out sections of ceiling or
climbing into the attic.