Service manual

Operating Procedures / Photos
Unsolder the pipeline connecting with valves ( to
prevent soldering gun from burning out the
chassis). Unscrew 2 bolts fixing gas valve ,and
then unsolder the weld spot between pipeline and
gas valve to remove gas valve. Unscrew the 2
bolts fixing liquid valve, and then unsolder the
soldering spot between pipeline and liquid valve
to remove liquid valve.
(Note:During unsoldering ,wrap the valves with
wet cloth avoid damage for high temperature.)
4. Disassemble Electric Box Sub-assy
Unscrew the 2 screws fixing electric box to pull
out the connection line between fan motor,
compressor,four-way valve, and then lift the elec-
tric box to take it out.
6. Disassemble Gas and Liquid Valves
Bolts
Liquid
Valve
Gas Valve
Screws
Electric box
5. Disassemble Right side plate
Unscrew the screw of the right side plate, then
take down the right side plate.
Right side plate