Spec sheet

12
7
/
8
"
12
3
/
4
"
9
7
/
8
"
17"
15
7
/
8
"
6"
Specifications subject to change without notice.
PROJECT
LOCATION
CONTRACTOR
ARCHITECT
ENGINEER
SUBMITTED BY DATE
FAN MODEL
CFM
IN
RPM WATTS AMPS SONES QTY
OPTIONAL EQUIPMENT
NUMBER NUMBER W.G. & REMARKS
Acceptable for use over
tub or shower when
installed in a GFCI
protected branch circuit.
SEE REVERSE SIDE FOR STATIC PRESSURE RANGES
• Grill
White, polymeric grill secured in place with torsion springs; easily removed if
necessary, dimensions - 17" x 15
7
/
8
".
• Blower Wheel
Balanced polymeric dual inlet blower wheel secured in place using a hex nut.
• Adjustable Capacity Motor
8 capacity settings on low speed allow the fan to be set to the required exhaust
rate for continuous ventilation. Low speed set points include:
30 40 50 60 70 90 100 & 120 CFM
High speed rapidly clears the air of moisture, odors or other contaminants. High
speed set points include: 80 110 130 Boost
Quiet 4 Pole motor, suitable for continuous operation, permanently lubricated,
115/120V 60 Hz., 0.30 amps. Ideal for compliance with Ashrae 62.2, LEED,
ENERGY STAR
®
for Homes, California Title 24 and other programs.
• Motion Sensor
Integrated motion sensor automatically turns fan to high speed when room is
occupied. Adjustable off delay from 30 seconds to 80 minutes.
• Humidity Sensor
Integrated humidity sensor, adjustable up to 80% RH automatically turns fan to
high speed until humidity drops to the desired set point.
• Fan Housing
23 gauge galvanized steel housing. Overall dimensions: 12
7
/
8
"x 12
3
/
4
"x 9
7
/
8
".
• Duct Collar
6" round, zinc plated metal collar adapter. Gasketed, spring loaded aluminum
backdraft damper.
• Electrical Connections
0.5" electrical knockouts provided. Easy wiring access via either internal
or external wiring compartment cover.
• Lighting
Electronic Quick Start Ballast – rated 26 Watt. Includes 26 watt,
Quad 4 pin PL lamp. 4 watt night light (night light bulb not included).
• Single Pack Shipping Info
Box Dim: 20" x 15
7
/
8
" x 11
3
/
8
"
Shipping Weight: 17 lbs.
• Unit Mounting
The housing will mount through drywall thickness up to
3
/
4
", with a
rough-in opening of 13
1
/
8
" x 13". The housing will mount either between
16" or 24" on center joists, using the 2 supplied housing mounting
brackets. The housing mounting brackets can be adapted for overhead
mounting (hardware not provided). The unit is provided with an optionally
installed ceiling flange to ensure proper building infiltration rates are
maintained and that no air leaks occur between the fan housing and
ceiling cutout.
M
E
E
T
S
M
A
D
E
I
N
A
M
E
R
I
C
A
R
E
Q
U
I
R
E
M
E
N
T
S
O
F
A
R
R
A
M
E
E
T
S
M
A
D
E
I
N
A
M
E
R
I
C
A
R
E
Q
U
I
R
E
M
E
N
T
S
O
F
A
R
R
A
VARIABLE AIRFLOW DUAL SPEED
EXHAUST FAN
SPECIFICATIONS
EVFDGH
Updated 5-16
Air King: 820 Lincoln Avenue
West Chester, Pennsylvania 19380-4466
Tel: [phone] • 877-304-3785
Fax: [phone]
HIGHEST AVAILABLE SPEED: 150 CFM/0.6 Sones @ 0.10 SP.
LOWEST AVAILABLE SPEED: 30 CFM/<0.3 Sones @ 0.10" SP.