User's Manual

Technical Support

1-800-248-0892

Figure 5

Figure 6

III. Removing the Upper Strut Mounting

Bracket

1. Remove the two nuts from the upper strut mount and discard.

NOTE: These are located behind the back-seat on the inside of

the vehicle.

IV. Installing the Upper Strut Mount

1. Place the upper strut mount (A) with the counter-sunk side

downwards, in place where the O.E.M. mount was previously

located.

2. Place the counter-sunk bolts (B) into the holes and place the

lock washers (C) and hex nuts (D) onto the bolts on the upper

strut tower from the inside of the vehicle . Tighten securely.