Installation Manual

MN-520

SECURING THE AIR SPRING TO THE BRACKETS

Push the roll plate outboard before tightening the lower bracket.

1. Secure the air spring to the lower brackets using an open-ended 9/16” wrench by

tightening the two bolts on the bottom of the spring assembly.

2. When both sides are installed, check all hardware to ensure that all is secure.

Minimum thumbs width

clearance between the

air spring and the frame.

Align the air spring

so that it is uniformly

positioned between

the upper and lower

bracket.

g. 8

NOTE

LoadLifter 5000