Dimensions Guide

4117 Pinnacle Point Drive, Suite 400, Dallas, Texas 75211
1-800-AIR-VENT (247-8368)
www.airvent.com • [e-mail]
AVI063-06/17
©2017 Air Vent, Inc.
REPLACEMENT PLUS
™
PROTECTION
Replacement Plus provides reimbursement
for all labor costs incurred in removing
any defective vent and installing the vent
replacement, in addition to the replacement
product itself.
AIR VENT INTAKE VENTS
Product Model Description Colors Size Net Free Area
The Edge Vent EVI Shingle-over, roof-top installed Black 4' 9 sq. in. per ft.
Vented Drip Edge VDE Aluminum White, Mill, Brown, Black 10' 9 sq. in. per ft.
Continuous Soffit Vent SV201 Louvered Aluminum Continuous soffit vent (Retrofit) White, Mill, Brown 8' 9 sq. in. per ft.
SV202 Louvered Aluminum Continuous soffit vent (New construction) White, Mill
, Brown 8' 9 sq. in. per ft.
SP8 Perforated Aluminum White, Mill, Brown 8' 8 sq. in. per ft.
SV351 Perforated PVC Continuous soffit vent (Retrofit) White, Brown 8' 9 sq. in. per ft.
SV352 Perforated PVC Continuous soffit vent (New construction) White 8' 9 sq. in. per ft.
Undereave Vents EV16424 Aluminum White, Mill, Brown 4" x 16" 28" pc
EV16624 Aluminum White, Mill, Brown 6" x 16" 42" pc
EV16824 Alum
inum White, Mill, Brown 8" x 16" 56" pc
HOW TO SIZE POWER VENTS?
Power vents are rated in CFM – cubic feet of air moved per
minute. The higher the CFM, the more powerful the vent and
the more air exchanges per hour it provides. To determine the
minimum CFM required, multiply the attic square footage
by 0.7. For example:
1500 square feet x 0.7 = 1050 CFM
Thus, a fan rated at least 1050 CFM is needed.
HOW MUCH INTAKE VENTILATION?
Just like any exhaust vent, power vents need intake airflow to
perform properly. To calculate how much intake the power vent
needs simply divide the fan’s CFM capacity by 300 and then
convert that number to square inches.
CFM of Power Vent
144
Sq. ft. of intake net
free area needed
Sq. in. of intake
net free area needed
300
=
=
X
1050 CFM
144
3.5 sq. ft. of intake
net free area needed
504 sq. in. of intake
net free area needed
300
=
=
X
Example:
A typical family of four produces an average
of 2 to 4 gallons of water vapor per day in a
home. In the winter this vapor is attracted to
the cooler air in the attic, where it quickly
condenses. Condensation can drip onto attic
insulation, reducing its effectiveness. This
moisture can cause wood rot to the attic
structure and promote the growth of mold
and mildew, affecting the quality of the air in the home. So, for
added protection, install a power vent equipped with a humidistat.
WHY A HUMIDSTAT?
Model 1020APV
1
with 20-watt solar panel
2
n Up to 1680 CFM under direct sunlight for attics up to 2,400
square feet
n Includes 30 feet of wire for ideal placement of solar panel
n Wind, hail and impact resistant solar panel
n 5-year Limited Warranty
3
n Requires 807 square inches of intake vents
4
GABLE-MOUNT
Model NPSG8
with 10-watt solar panel
n Up to 800 CFM under direct sunlight for attics up to 1,200
square feet
n Solar panel mounts directly over the shingles
n Wind, hail and impact resistant solar panel
n 5-year Limited Warranty includes 2-year Replacement Plus™
protection
3
n Requires 384 square inches of intake vents
4
SOLAR CONTROLLER
™
n Electronic thermostat – enable or disable. Turns fan on,
power source permitting, at 80° F and off at 77° F.
n Electronic humidistat – turns fan on, power source permitting,
at 75% relative humidity and off at 65% relative humidity.
n AC Power adapter for operation after dark or when solar
power not available:
n Runs on intermittent 15-minute cycles for up to 10 hrs. or
until solar power becomes available.
n Hand-held remote displays attic temperature, attic humidity,
fan operating status and fan power source.
n 1-year Limited Warranty
3
Sold Separately
ROOF-MOUNT MODELS
Product CFM Colors Attic Size
Model ASRHP 1500 Gray, Brown, Black, Weatherwood 2,100 sq. ft.
with automatic
thermostat/humidistat
Model SV3000 with 1500 Brown, Weatherwood 2,100 sq. ft.
automatic thermostat
Model PC12 1170 Gray, Brown, Black, Weatherwood 1,650 sq. ft.
with automatic
thermostat/humidistat
Model RV28 with 1320 Gray, Weatherwood 1,900 sq. ft.
automatic thermostat
Model RV26 with 1170 Steel: Gray, Brown, Black, Weatherwood 1,650 sq. ft.
automatic thermostat Plastic: Gray
9930TR with 1960 Black 2,800 sq. ft.
30-watt solar panel
9920TR with 1680 Black 2,400 sq. ft.
Solar Controller
and 20-watt solar panel
9912TR with 945 Black 1,350 sq. ft.
12-watt solar panel
SolarCool SC8BL 800 Black 1,200 sq. ft.
with 10-watt solar panel
SolarCool NPSP8WW 800 Weatherwood 1,200 sq. ft.
with separate10-watt
solar
panel
GABLE-MOUNT MODELS
Product CFM Attic Size
APGH with automatic 1620 2,300 sq. ft.
thermostat/humidistat
APG with 1620 2,300 sq. ft.
automatic thermostat
WCGB with 1320 1,900 sq. ft.
automatic thermostat
WCGA with 1050 1,500 sq. ft.
automatic thermostat
1020APV with 1680 2,400 sq. ft.
20-watt solar panel
NPSG8 with 800 1,200 sq. ft.
10-watt solar panel
AIR VENT POWER VENTS
Quality-Built, Efficient Fans
from the Industry Leader in
Attic Ventilation
n Reduce energy costs
n Help eliminate damaging moisture
n Improve air quality
n Extend roof and
shingle life
Expanded Lineup of
Solar Powered Models
– including
operation without
sunlight
Solar Controller™
Humidistat/Thermostat
Intelligently manages operation of
Models 9930TR, 9920TR, 9912TR
AVI014_AVI063R_May2017_new_Layout 1 7/6/17 3:27 PM Page 1