User's Manual

The wired Ethernet (WAN) port is used to connect with ADSL/Cable modem and the wireless

NIC is used for your private WLAN. The NAT is existed between the 2 NIC and all the

wireless clients share the same public IP address through the WAN port to ISP. The default IP

configuration for WAN port is static IP. You can access the web server of device through the

default WAN IP address 172.1.1.1 and modify the setting base on your ISP requirement.

Bridge

The wired Ethernet and wireless NIC are bridged together. Once the mode is selected, all the

WAN related functions will be disabled.

WISP (Wireless ISP)

This mode can let you access the AP of your wireless ISP and share the same public IP address

form your ISP to the PCs connecting with the wired Ethernet port of the device. To use this

mode, first you must set the wireless radio to be client mode and connect to the AP of your ISP

then you can configure the WAN IP configuration to meet your ISP requirement.

The wireless radio of the device acts as the following roles.

AP (Access Point)

The wireless radio of device serves as communications “hub” for wireless clients and provides

a connection to a wired LAN.

AP Client

This mode provides the capability to connect with the other AP using infrastructure/Ad-hoc

networking types. With bridge operation mode, you can directly connect the wired Ethernet

port to your PC and the device becomes a wireless adapter. And with WISP operation mode,

you can connect the wired Ethernet port to a hub/switch and all the PCs connecting with

hub/switch can share the same public IP address from your ISP.

WDS (Wireless Distribution System)

This mode serves as a wireless repeater; the device forwards the packets to another AP with

WDS function. When this mode is selected, all the wireless clients can’t survey and connect to

the device. The device only allows the WDS connection.

WDS+AP

This mode combines WDS plus AP modes, it not only allows WDS connections but also the

wireless clients can survey and connect to the device.

The following table shows the supporting combination of operation and wireless radio modes.

Bridge Router WISP

V V X