User's Manual

Examples of Configuration

This example demonstrates how to set up a network with different device configurations.

There are 2 DHCP servers (DEV1/DEV4) in the network to control the IP configuration of 2

domains (192.168.2.x/192.168.3.x). Once the setting is done, all the PCs can visit Internet

through DEV1.

We assume all the devices keep the factory default setting. To make sure that user can

continuing press the rest button for more than 5 seconds to restore the factory default setting.

The following descriptions show the steps to configure DEV1 to DEV5.

Configure DEV1:

1. Connect the ADSL modem to Ethernet port of device using Ethernet cable.

2. Access the web server (http://192.168.2.254) of device from the wireless station.

3. Use Wizard page to setup device.