User's Manual

6 Rev 20200702A
• Keep the cord away from heated surfaces.
• This device is designed for indoor use only.
• Only set on dry surfaces. Do not place on surface wet from water or
cleaning solvents.
Troubleshooting Guide
Description
LED Behavior
Troubleshooting
Powering on Charger
2.5 second off, then all three LED's
are on bright, then fade to off,
slowly, about 0.5 seconds
Normal Operation
Device Charging
One LED on for each 1/3 of the
charging surface.
LED on, bright, and about 5
seconds later, dims
Normal Operation
Device Charge cycle
complete
LED remains on, dimly lit
Normal Operation
FOD detected
or Charging too warm
LED's blink at uniform cadence
Check surface for FOD
Check under the charger for
FOD
Remove the device
System error/Power
Adapter error
All 3 LED's blink on 3x, then off
1x
Power supply error, too low
Wattage
Replace with new AC
Adapter
LED’s for each of the three charging
areas.