Owners manual

1
# 200-580 INSTALLATION INSTRUCTIONS
96-05 Chevrolet/GMC S-10/S-15 4.3L
96-00 Fullsize 4.3L
Parts List
AIR-KIT580PA Aluminum Plate (1)
AIR-KIT580H Hardware
6mm x 3 1/2” long Stud (for rear) (1)
6mm x 60mm Bolts (2)
6mm x 5 1/2” Studs (2)
6mm x 50mm Bolts (2)
6mm Nuts (3)
6mm Flat Washers (3)
1” long Aluminum Spacers (2)
“O”-Ring .138 diameter (1)
Tools List
10 mm Socket
7/32 Socket
Flathead Screwdriver
Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the
instruction manual carefully before proceeding with the installation. Your PowerAid
Throttle Body Spacer was carefully inspected and packaged. Check that no parts are
missing, or were damaged during shipping. If you need any assistance please call 1-
800-858-3333 to speak with a representative in our Customer Service Center before
returning the product.
Thank you for selecting AIRAID.
Included with your Poweraid Spacer is a sticker with a California Air Resources Board
(C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of
the engine compartment. Failure to do so may prevent you from passing a smog inspection.
INTAKE SYSTEMS FOR VEHICLES LISTED ARE 50 STATE
LEGAL. SEE AIRAID.COM FOR CARB STATUS ON EACH
PART FOR A SPECFIC VEHICLE.

Summary of content (2 pages)