Owners manual

# 300-560 INSTALLATION INSTRUCTIONS

94-01 Dodge Ram 3.9L, 5.2L

94-03 Dodge Ram 5.9L

Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the in-

struction manual carefully before proceeding with the installation. Your PowerAid Throttle

Body Spacer was carefully inspected and packaged. Check that no parts are missing, or

were damaged during shipping. If you need any assistance please call 1-800-858-3333 to

speak with a representative in our Customer Service Center before returning the product.

Thank you for selecting AIRAID.

Parts List

AIR-KIT560PA Aluminum Plate (1)

AIR-KIT560G Gasket (1)

AIR-KIT560H Hardware

5/16-18” x 3 1/4” Bolts (4)

5/16” Lock Washers (4)

Spacer (3/4” long) (1)

Tools List

1/2” Socket

Ratchet & Extension

Standard Screwdriver

Also available for your Dodge Ram, the

Airaid Intake System p/n 300-106.

Call for details!

INTAKE SYSTEMS FOR VEHICLES LISTED ARE 50 STATE

LEGAL. SEE AIRAID.COM FOR CARB STATUS ON EACH

PART FOR A SPECFIC VEHICLE.

PAGE 1
# 300-560 INSTALLATION INSTRUCTIONS 94-01 Dodge Ram 3.9L, 5.2L 94-03 Dodge Ram 5.9L INTAKE SYSTEMS FOR VEHICLES LISTED ARE 50 STATE LEGAL. SEE AIRAID.COM FOR CARB STATUS ON EACH PART FOR A SPECFIC VEHICLE. Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the instruction manual carefully before proceeding with the installation. Your PowerAid Throttle Body Spacer was carefully inspected and packaged. Check that no parts are missing, or were damaged during shipping.
PAGE 2
Installation Instructions. Read Me! 1. DISCONNECT NEGATIVE (-) BATTERY CABLE. 2. Remove the air cleaner. 3. Using 1/2” socket, remove (4) 5/16” bolts attaching the throttle body to the manifold. 4. Lift the throttle body. 5. Remove the old gasket and clean both the throttle body and manifold surfaces. 6. Install power plate with (2) gaskets. (Ref. A) A. Place one gasket between thr ottle body and the power plate. B. Place second gasket between the power plate and intake manifold. 7.