Owners manual

2
Installation Instructions. Read Me!
1. DISCONNECT NEGATIVE (-) BATTERY CABLE.
2. Remove air intake assembly.
3. Remove the original (4) bolts from the throttle body.
4. For vehicles with Aluminum Manifolds: Install power plate using supplied (4) 6mm x 60mm bolts and
(4) 6mm flat washers.
5. For vehicles with composite manifolds: Use (4) 51mm Black Screws (Ref. “B”) (The 51mm black screws
are not compatible with metal threaded intake manifolds.)
6. Inspect & Test throttle linkage for full Open & Closed travel before driving. Some cruise or kickdown cables
may require adjustment, Please refer to your vehicles service manual.
7. Reinstall the throttle body air intake assembly using Step 2 as an example.
8. Reconnect negative battery cable. Enjoy!
AIR-I35532B
Rev. 12.22.16
Ref. “A”- (1) Power Plate
(1) “O”-Ring
Ref. “B”- Aluminum manifolds use
(4) 6mm x 60mm Bolts
(4) 6mm Washers
Composite manifolds Models Use:
(4) 51mm Black Screws
Airaid. 1815 West Crest Lane. Phoenix AZ 85027 [phone] [e-mail] www.airaid.com